Motorcycle

Product catalog for this type of product are located at the bottom of the page

Motorcycles
Motorcycle applications are easy for all bikes, 2 wheel or 3 wheel
Front
80 - 120 mm tire width 1 oz
80 - 120 mm tire width (BMW Telelever only) 2 oz
130 mm tire width and up 2 oz
Rear
130 mm - 240 mm width 2 oz
250 mm - 360mm tire width 3 oz
195 - 205 car tires on the rear 3 oz
M Series Tires Sizes
MH use 80 mm width MR use 120 mm width
MJ use 90 mm width MT use 130 mm width
MM use 100 mm width MU use 140 mm width
MN or MP use 110 mm width MV use 150 mm width
These codes are typical for Harleys but can be for any tire. The codes do not go beyond 150mm in width. With these tires, the first number of the tire size is not the actual width, it is just a number. The M-code is what tells you the actual width.
Scooters
10" diameter wheels (scooters) 1 oz
12" & Up diameter wheels (scooters) 2 oz
Dual Purpose / Off Road with Rim Locks
Front - 80 - 120 mm tire width 2 oz
Rear - 130 -230 mm width 3 oz
Rim Locks - add one ounce over what you normaly use for that size tire to accomodate the additional weight of the rim lock. Two rim locks opposite each other don't require any more Dyna Beads other than stated above, as they have a tendency to cancel each other out.
Note: Filtered valve cores do not fit all stems. They require a seat 1-1/4" down in the stem. If you cannot use them, simply rotate the tire so the valve stem is about the 6:00 position, then give the valve stem a quick shot of air prior to checking pressure.

3 Items

per page
Set Descending Direction
  1. Bike Pack - (2) 1 oz bags + Applicator
    Bike Pack - (2) 1 oz bags + Applicator
    C$19.95
    Usually in stock

  2. Bike Pack - (2) 2 oz bags + Applicator
    Bike Pack - (2) 2 oz bags + Applicator
    C$27.95
    Usually in stock

3 Items

per page
Set Descending Direction
© 2018 Dyna Beads Canada. All Rights Reserved.